LM25116MHX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25116 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 6V~42V |
| Quiescent Current | 4.6mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 6V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 590kHz |
| Max Duty Cycle | 85 % |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25116MHX/NOPB Overview
Capsuled in the 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 6V~42V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. The switching controller is capable of switching at the 50kHz~1MHz position. dc dc regulator can be generalized using Surface Mount. Enable, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . Different dc switching's functions can be applied to 20 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 24V. LM25116 can be used to locate other relevant dc to dc converter ics. 20 pins are present on switching converter. It is recommended that the dc dc voltage regulator's minimum input voltage be 6V. DC regulator outputs 36V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 10A, so note that when you start the project. It is set to 85 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. This dc regulatorhas a max frequency of 590kHz. It is suggested that users apply 42V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. As long as the dc switching is in a dormant state, it utilizes 4.6mA.
LM25116MHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
LM25116MHX/NOPB Applications
There are a lot of Texas Instruments LM25116MHX/NOPB DC to DC converter applications.
- Thermal power
- Solar power plants
- Various precision measuring detectors
- Cutting machine tools
- ATMs
- Computer application technology
- Industrial robots
- Household control circuits
- Access control systems
- Serial communication converter
