LM25117PMHX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 750kHz |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25117PMHX/NOPB Overview
As a result of 20-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 4.5V~42V voltage are supplied and operated. A -40°C~125°C TJ dc switcher is not a problem. There is a switch at Up to 750kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Surface Mount. Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . 20 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 24V. A search for "LM25117" will reveal other relevant dc to dc converter ics. 20 pins are on switching converter. Switching converter type is specifically Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 800mV voltage. The dc dc regulator's usual output current is 3.3A, which should be noted down when you start a project. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulators have a maximum frequency of 750kHz. When running the voltage regulator dc to dc in a circuit, users should apply 42V to ensure safety and reliability. During dormancy, the dc switching uses 4.8mA.
LM25117PMHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 750kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM25117PMHX/NOPB Applications
There are a lot of Texas Instruments LM25117PMHX/NOPB DC to DC converter applications.
- Household control circuits
- Telecommunications equipment
- Planers
- Hydraulic presses
- Linear guide
- Bending machines
- Automatic testing equipment
- Gear/thread machining machines
- Correction machines
- Surge protection circuits
