LM25117QPMH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25117 |
| Function | Step-Down |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 750kHz |
| Input Voltage (Max) | 42V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 750kHz |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25117QPMH/NOPB Overview
Capsuled in the 20-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. There is a Tube solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control operates at 4.5V~42V and has a 4.5V~42V supply voltage. Qualified to work in an dc switcher with -40°C~125°C TJ. The switching controller can be switched at Up to 750kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 20 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 24V. You can find other relevant dc to dc converter ics by searching "LM25117". Pins number 20 of switching converter in total. In particular, switching converter belongs to the Switching Regulator or Controllers family. 4.5V should be the minimum input voltage for the dc dc voltage regulator. Considering the dc to dc regulator can only accept 42V input voltage, it is important to take note of this. The max frequency of the pmic can reach 750kHz. Thare are switch converters of the Automotive, AEC-Q100 series. Dormant dc switchings use 4.8mA. This controller contains 1 phases.
LM25117QPMH/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 750kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM25117QPMH/NOPB Applications
There are a lot of Texas Instruments LM25117QPMH/NOPB DC to DC converter applications.
- Ball screw pair
- Production lines
- Boring machines
- Flaw detection equipment
- Scientific testing
- Medical equipment
- CMM
- Various precision measuring detectors
- Imported equipment
- SMT equipment
