LM25117QPMHX/NOPB
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 750kHz |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
LM25117QPMHX/NOPB Overview
It comes in the 20-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 1 outputs can be generated with the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. 4.5V~42V is the operating voltage and supply voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. The switching controller is capable of switching at the Up to 750kHz position. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 20 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 24V nominal DC switcher's voltage input. LM25117 can be searched for other relevant dc to dc converter ics. 20 pins are present on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator should be 4.5V. A 800mV voltage of DC regulator was detected in the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 3.3A, so you should note it down when starting a new project. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. It is estimated that this dc regulatorhas a maximum frequency of 750kHz. A circuit should contain 42V in order to ensure the voltage regulator dc to dc runs safely and reliably. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. Dormant dc switchings use 4.8mA.
LM25117QPMHX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 750kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM25117QPMHX/NOPB Applications
There are a lot of Texas Instruments LM25117QPMHX/NOPB DC to DC converter applications.
- Die casting equipment
- Current source circuits
- Production lines
- Textile machinery
- Terrestrial set-top boxes
- Balance equipment
- Power supplies of electronic gadgets
- Smart grid
- Geothermal power
- PSRR circuits
