LM25117QPSQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PROGRAMMABLE OUTPUT FROM 0.8V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM25117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3.3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 4.8mA |
| Control Features | Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 750kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 750kHz |
| Clock Sync | No |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25117QPSQE/NOPB Overview
The switching controller fits in the 24-WFQFN Exposed Pad package and is ideal for most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 4.5V~42V volts and has 4.5V~42V supply voltage. Suitable for work in a -40°C~125°C TJ dc switcher. This switching controller can switch at Up to 750kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Switching control is made easier with the dcdc regulator's Frequency Control, Ramp, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. A variety of terminations with 24 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 24V. Searching "LM25117" will return other relevant dc to dc converter ics. The switching converter has a total of 24 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.5V. Test statistics indicate DC regulator outputs 800mV voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 3.3A. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator750kHz has the maximum frequency. In order to satisfy the need, DC to DC voltage regulator has a value of PROGRAMMABLE OUTPUT FROM 0.8V. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 42V. Automotive, AEC-Q100 is a series of dc to dc voltage regulator. In dormant mode, 4.8mA is used.
LM25117QPSQE/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 750kHz
Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
PROGRAMMABLE OUTPUT FROM 0.8V
LM25117QPSQE/NOPB Applications
There are a lot of Texas Instruments LM25117QPSQE/NOPB DC to DC converter applications.
- Surface processing equipment
- Wide-range voltage regulation circuits
- Boring machines
- Injection molding machinery
- Balance equipment
- Access control systems
- Planers
- Communication system
- CNC system
- Hydro power
