LM25122QPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | SEATED HGT-NOM, OUTPUT VOLTAGE OPERATES UP TO 50V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25122 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~42V |
| Quiescent Current | 4mA |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 450kHz |
| Input Voltage (Max) | 42V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25122QPWPRQ1 Overview
It comes in a 20-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 3V~42V and has a 3V~42V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. Switching can be done at 450kHz with this switching controller. A generalization of dc dc regulator can be made using Surface Mount. The dcdc regulator features Enable, Frequency Control, Soft Start for efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 20. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "LM25122". In total, switching converter has 20 pins. dc dc voltage regulators should have a minimum input voltage of 4.5V. A maximum voltage of 42V is accepted by the dc to dc regulator as an input voltage. The value of DC to DC voltage regulator is set at SEATED HGT-NOM, OUTPUT VOLTAGE OPERATES UP TO 50V in order to fulfill the requirements more effectively. Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series. Dormant dc switchings use 4mA.
LM25122QPWPRQ1 Features
Transistor Driver Outputs
Switching Frequency: 450kHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
SEATED HGT-NOM, OUTPUT VOLTAGE OPERATES UP TO 50V
LM25122QPWPRQ1 Applications
There are a lot of Texas Instruments LM25122QPWPRQ1 DC to DC converter applications.
- Alternators
- Gear/thread machining machines
- Current source circuits
- Industrial controllers
- Adjustable voltage or current linear circuits
- Sink circuits
- Direct power supply system
- Balance equipment
- Communication system
- Production lines
