LM2524DN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM2524 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 20V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Control Features | Current Limit, Enable, Frequency Control |
| Input Voltage (Min) | 8V |
| Topology | Buck, Boost |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 200ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 49% |
| Switching Frequency | 550kHz |
| Height Seated (Max) | 5.08mm |
| Width | 6.35mm |
| RoHS Status | Non-RoHS Compliant |
LM2524DN Overview
The switching controller fits in the 16-DIP (0.300, 7.62mm) package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. Tube solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). A 8V~40V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Through Hole makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 16. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 20V. You can find other relevant dc to dc converter ics by searching "LM2524". The switching converter has a total of 16 pins. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator should be 8V. As determined by the test statistics, the output voltage of DC regulator is 60V. It should be noted that the dc to dc regulator only accepts 40V voltage as input voltage. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. 550kHz is the frequency at which this controller can mostly perform fine.
LM2524DN Features
Transistor Driver Outputs
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Switching Frequency: 550kHz
LM2524DN Applications
There are a lot of Texas Instruments LM2524DN DC to DC converter applications.
- Digital precision reference circuits
- Fire elevators
- Television equipment
- Linear guide
- Computer-related products
- Game consoles
- Low output voltage switching power supply circuits
- Precision electronic equipment
- USB circuits
- Power supplies of electronic gadgets
