LM2575HVS-ADJ
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Current Rating | 1A |
| Frequency | 52kHz |
| Base Part Number | LM2575 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 77 % |
| Voltage - Input (Max) | 60V |
| Output Voltage | 57V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 60V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 10mA |
| Max Output Voltage | 57V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.23V |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2575HVS-ADJ Overview
For optimal performance, this voltage regulator makes use of the Tube package. During the development of this harley voltage regulator, 5 terminations were made. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. The space-saving TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package is available for this voltage regulator. The voltage regulator is configured with 1 outputs. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. The voltage regulator 12v fits the Surface Mount mounting hole. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. The voltage regulator can be operated with a voltage as low as 4V as an input voltage. Voltage regulator's input voltage can reach 60V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. To meet the operation requirements, voltage regulator is designed to provide 12V as the nominal input voltage. DC/DC regulators such as this one belong to the LM2575 family of products. Voltage can be produced at 57V volts by voltage regulator. There are 5 pins used for switching regulator operation. The output voltage for this switching regulator should be kept at 1.23V at least. For switching regulator maximum operation, dc to dc voltage regulator delivers 1A A. There is a maximum output voltage of 57V from this voltage regulator 12v. As the name implies, this voltage regulator belongs to the SIMPLE SWITCHER? family of voltage regulators, and it is a type of switching DC-DC regulator. Voltage regulator consumes 10mA A of quiescent current without being affected by outside forces. In this case, a dc to dc voltage regulator's minimum supply voltage of 4V volts is required to ensure reliable performance. There is a maximum input voltage of 60V that DC DC switching regulator can operate from. With a frequency of 52kHz, dc to dc voltage regulator has high accuracy.
LM2575HVS-ADJ Features
1 outputs
Peak reflow temperature (Cel) of 235
5 pins
LM2575HVS-ADJ Applications
There are a lot of Texas Instruments LM2575HVS-ADJ Voltage Regulators applications.
- Imported equipment
- Servo drive system
- Communication system
- Bending machines
- Remotely powered electric motors
- Sink circuits
- Boring machines
- Power supplies of electronic gadgets
- Smoke exhaust equipment
- Various precision measuring instruments
