LM2575HVS-ADJ/NOPB
| Parameters | |
|---|---|
| Synchronous Rectifier | No |
| Min Output Voltage | 1.23V |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Current Rating | 1A |
| Base Part Number | LM2575 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 77 % |
| Output Voltage | 57V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 60V |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 10mA |
| Max Output Voltage | 57V |
| Voltage - Output (Min/Fixed) | 1.23V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 52kHz |
| Control Technique | PULSE WIDTH MODULATION |
LM2575HVS-ADJ/NOPB Overview
There is an optimized performance in this voltage regulator because it utilizes the Tube package. Throughout this voltage regulator, there are 5 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. Space-saving TO-263-6, D2Pak (5 Leads + Tab), TO-263BA packages are available for this harley voltage regulator. There are 1 outputs on DC DC switching regulator. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. There is a switching regulator that is compatible with the Surface Mount mounting. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. DC-DC switching regulators reach 52kHz switching frequencies. This voltage regulator is able to operate with the minimal input voltage of 4V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.23V. 245 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. To meet the switching regulator operation requirements, a nominal input voltage of 12V is provided. In this case, the DC/DC regulator belongs to the family LM2575. At 57V volts, voltage regulator can provide voltage. For switching regulator operation, 5 pins are used. This voltage regulator 12v should be configured with an output voltage that is at least 1.23V. Accordingly, dc to dc voltage regulator's maximum output current is 1A A. A maximum voltage of 57V can be obtained from the regulator voltage. The switching DC-DC regulator belongs to the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. With a supply voltage of 60V, this harley voltage regulator works. Despite external influences, voltage regulator consumes 10mA A of quiescent current.
LM2575HVS-ADJ/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
5 pins
Operating supply voltage of 60V
LM2575HVS-ADJ/NOPB Applications
There are a lot of Texas Instruments LM2575HVS-ADJ/NOPB Voltage Regulators applications.
- Analog precision reference circuits
- Constant current circuits
- Servo drive system
- Energy management systems
- Computer monitoring equipment of building
- Balance equipment
- Plate bending machines
- Experimental setup
- Program control systems
- Domestic water pumps
