LM2575S-5.0/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | LM2575 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 77 % |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 1A |
| Operating Supply Voltage | 40V |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 12V |
| Voltage | 40V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 10mA |
| Voltage - Output (Min/Fixed) | 5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 52kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Output Voltage | 5V |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2575S-5.0/NOPB Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. In this voltage regulator, there are 6 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. This harley voltage regulator is available in the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package for the purpose of space saving. There are 1 outputs configured on the voltage regulator. As you can see, this DC DC switching regulator generates Fixed output on its output pins. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. A DC-DC switching regulator of this type operates at a switching frequency of 52kHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 4V. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 5V. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. For operation, switching regulator requires a nominal input voltage of 12V. DC/DC regulators such as this one belong to the LM2575 family of products. The adjusting voltage regulator's output voltage is maintain at 5V. During switching regulator operation, 5 pins are used. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 1A A. A switching DC-DC regulator, it is a member of the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. This DC-DC switching regulator operates from a supply voltage of 40V. External factors have no impact on DC DC switching regulator's ability to consume 10mA A of quiescent current.
LM2575S-5.0/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
5 pins
Operating supply voltage of 40V
LM2575S-5.0/NOPB Applications
There are a lot of Texas Instruments LM2575S-5.0/NOPB Voltage Regulators applications.
- Sink circuits
- Product burn-in
- Experimental setup
- Milling machines
- Medical equipment
- Domestic water pumps
- Window air conditioners
- Linear guide
- Electric heating, lighting
- Telecommunications equipment
