LM2576HVS-3.3/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | LM2576 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 75 % |
| Output Voltage | 37V |
| Output Type | Fixed |
| Max Output Current | 3A |
| Operating Supply Voltage | 60V |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Max Output Voltage | 3.482V |
| Voltage - Output (Min/Fixed) | 3.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 52kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 60V |
| Min Output Voltage | 3.135V |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2576HVS-3.3/NOPB Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. There are 5 terminations in this voltage regulator. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. In order to save space, this voltage regulator is packaged in the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package. There are 1 outputs configured on this voltage regulator 12v. This DC DC switching regulator generates Fixed output on its output pins. Surface Mount-mounting is compatible with this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. 52kHz is the switching frequency of this DC-DC switching regulator. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. As a result, the output voltage of the voltage regulator 12v (Min/Fixed) is 3.3V. A regulator voltage's peak reflow temperature amounts to 245 being indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 12V. DC/DC regulators such as this one belong to the LM2576 family of products. A voltage of 37V volts can be generated by DC DC switching regulator. There are 5 pins that are used for the operation of the voltage regulator 12v. In order for this switching regulator to work properly, the output voltage should be at least 3.135VV. A maximum output current of 3A A is provided to meet the switching regulator operation requirements. A maximum voltage of 3.482V can be obtained from the regulator voltage. Known as a switching DC-DC regulator, this electronic voltage regulator 12v is part of the SIMPLE SWITCHER? family. DC-DC switching regulator with 60V supply voltage. There are no external factors that affect DC DC switching regulator's consumption of 5mA A of quiescent current.
LM2576HVS-3.3/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
5 pins
Operating supply voltage of 60V
LM2576HVS-3.3/NOPB Applications
There are a lot of Texas Instruments LM2576HVS-3.3/NOPB Voltage Regulators applications.
- Nuclear power plants
- Boring machines
- Flaw detection equipment
- Series voltage regulation circuits
- Smart grid
- Wide-range voltage regulation circuits
- Wind power
- Balance equipment
- Adjustable voltage or current linear circuits
- Laboratories
