Parameters |
Lifecycle Status |
NRND (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Series |
SIMPLE SWITCHER® |
JESD-609 Code |
e0 |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Current Rating |
3A |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
LM2576 |
Function |
Step-Down |
Number of Outputs |
1 |
Efficiency |
77 % |
Output Voltage |
5V |
Output Type |
Fixed |
Max Output Current |
3A |
Operating Supply Voltage |
60V |
Input Voltage-Nom |
12V |
Min Supply Voltage |
4V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
16mA |
Output Configuration |
Positive |
Quiescent Current |
5mA |
Input Voltage (Min) |
8V |
Voltage - Output (Min/Fixed) |
5V |
Topology |
Buck |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
52kHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
No |
Height |
4.83mm |
Length |
10.16mm |
Width |
8.42mm |
Thickness |
4.58mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LM2576HVS-5.0 Overview
This harley voltage regulator utilizes the Tube package for optimized performance. Throughout this voltage regulator, there are 5 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. In order to save space, this harley voltage regulator is available in the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package. 1 outputs of voltage regulator are configured. On its output pins, this adjusting voltage regulator generates Fixed output. A Surface Mount mounting is required for this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. A DC-DC switching regulator of this type operates at a switching frequency of 52kHz. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 5V. With its peak reflow temperature of 235, this voltage regulator is essentially indestructible. An input voltage of 12V is required for switching regulator operation. DC/DC regulators such as this one belong to the LM2576 family of products. Voltage of voltage regulator can be delivered at 5V volts. During switching regulator operation, 5 pins are used. A maximum output current of 3A A is provided to meet the switching regulator operation requirements. This regulator voltage, belonging to the SIMPLE SWITCHER? family, is a type of DC-DC switching regulator. 60V is the supply voltage for this DC-DC switching regulator. There is no external influence on harley voltage regulator as it consumes 5mA A of quiescent current. In order to ensure reliable performance, the dc to dc voltage regulator's minimum supply voltage is 4V volts. There is a dc to dc voltage regulator's minimum input voltage of 8V allowed by this voltage regulator dc to dc.
LM2576HVS-5.0 Features
1 outputs
Peak reflow temperature (Cel) of 235
5 pins
Operating supply voltage of 60V
LM2576HVS-5.0 Applications
There are a lot of Texas Instruments LM2576HVS-5.0 Voltage Regulators applications.
- Low output voltage switching power supply circuits
- Automation technology
- Terrestrial set-top boxes
- Network technology
- Production lines
- Linear guide
- Boring machines
- Surge protection circuits
- Current source circuits
- Remotely powered electric motors