LM2576S-3.3/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Current Rating | 3A |
| Frequency | 52kHz |
| Base Part Number | LM2576 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 75 % |
| Voltage - Input (Max) | 40V |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 3A |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Max Output Voltage | 3.3V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Output Voltage | 3.3V |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2576S-3.3/NOPB Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, 5 terminations are present. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. In order to save space, this voltage regulator is packaged in the TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package. There are 1 outputs configured on the voltage regulator. DC DC switching regulators like this one generate Fixed outputs on their output pins to handle the power management. There is a switching regulator that is compatible with the Surface Mount mounting. Keeping dc to dc voltage regulator's operating temperature at -40°C~125°C TJ is essential when operating. Voltage regulators' input voltage is limited to 40V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. For operation, switching regulator requires a nominal input voltage of 12V. LM2576 is a family of voltage regulators that belong to the DC/DC industry. There is a possibility that DC DC switching regulator can give voltage at 3.3V volts. The switching regulator operation of the system is controlled by 5 pins. A 3A A maximum output current is required to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is 3.3V. This regulator voltage, belonging to the SIMPLE SWITCHER? family, is a type of DC-DC switching regulator. Despite external influences, voltage regulator consumes 5mA A of quiescent current. In order to ensure reliable performance, the dc to dc voltage regulator's minimum supply voltage is 4V volts. As long as the supply voltage is greater than 40V, the voltage regulator 12v will operate correctly. With a frequency of 52kHz, dc to dc voltage regulator maintains high accuracy.
LM2576S-3.3/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
5 pins
LM2576S-3.3/NOPB Applications
There are a lot of Texas Instruments LM2576S-3.3/NOPB Voltage Regulators applications.
- Plate bending machines
- PSRR circuits
- Domestic water pumps
- Game consoles
- Digital display device
- Experimental setup
- Flaw detection equipment
- Electrical distribution systems
- Driver circuits
- Television equipment
