LM2586S-12/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | LM2586 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Efficiency | 93 % |
| Voltage - Input (Max) | 40V |
| Output Voltage | 12V |
| Output Type | Fixed |
| Max Output Current | 3A |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 5V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 3A Switch |
| Quiescent Current | 11mA |
| Max Output Voltage | 12.6V |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~200kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 11.4V |
| Height | 4.65mm |
| Length | 10.1mm |
| Width | 8.89mm |
| Thickness | 4.44mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2586S-12/NOPB Overview
This harley voltage regulator utilizes the Tube package for optimized performance. There are 7 terminations in this harley voltage regulator. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. In order to save space, this harley voltage regulator is available in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package. 1 outputs have been configured in the voltage regulator 12v. This DC DC switching regulator generates Fixed output on its output pins. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. This voltage regulator 12v reaches a switching frequency of 100kHz~200kHz. Featuring a 3A Switch output current, dc to dc voltage regulator offers maximum design flexibility. 40V volts is DC DC switching regulator's maximum input voltage. A regulator with this 245 peak reflow temperature is essentially indestructible. An input voltage of 5V is required for switching regulator operation. DC/DC regulators of this type are part of the LM2586 family of voltage regulator 12vs. Voltage can be produced at 12V volts by voltage regulator. There are 7 pins used for switching regulator operation. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 11.4V. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 3A A. With a maximum output voltage of 12.6V, DC DC switching regulator has a very high efficiency. A switching DC-DC regulator, it is a member of the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. Switching regulators such as this operate from voltages of 40V. External factors have no impact on DC DC switching regulator's ability to consume 11mA A of quiescent current. The dc to dc voltage regulator's minimum supply voltage of 4V volts ensures reliable performance.
LM2586S-12/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
7 pins
Operating supply voltage of 40V
LM2586S-12/NOPB Applications
There are a lot of Texas Instruments LM2586S-12/NOPB Voltage Regulators applications.
- Machining centers
- Household control circuits
- Current source circuits
- ATMs
- Laboratories
- Wide-range voltage regulation circuits
- Alternators
- Direct power supply system
- Hydraulic presses
- Computed tomography (CT)
