Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
Number of Pins |
7 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Series |
SIMPLE SWITCHER® |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Switching Regulator or Controllers |
Technology |
BIPOLAR |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Base Part Number |
LM2588 |
Function |
Step-Up, Step-Up/Step-Down |
Number of Outputs |
1 |
Output Voltage |
1.23V |
Output Type |
Fixed |
Max Output Current |
5A |
Operating Supply Voltage |
40V |
Voltage - Input (Min) |
4V |
Input Voltage-Nom |
5V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
5A Switch |
Quiescent Current |
11mA |
Voltage - Output (Min/Fixed) |
12V |
Topology |
Boost, Flyback, Forward Converter |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
100kHz~200kHz |
Synchronous Rectifier |
No |
Height Seated (Max) |
4.8mm |
Width |
8.635mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LM2588S-12 Overview
A Tube package is used in this voltage regulator to optimize performance. During the development of this harley voltage regulator, 7 terminations were made. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. There is a TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs on DC DC switching regulator. The adjusting voltage regulator generates Fixed output. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. There is a switching frequency of 100kHz~200kHz for this voltage regulator 12v. The voltage regulator can be operated with a voltage as low as 4V as an input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 12V. The output current of 5A Switch makes dc to dc voltage regulator feature maximum design flexibility. Due to its 235 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. An input voltage of 5V is required for switching regulator operation. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. There is a DC/DC regulator in this family that belongs to the LM2588 family. There is a possibility that DC DC switching regulator can give voltage at 1.23V volts. The switching regulator operation of the system is controlled by 7 pins. The maximum output current reaches 5A A to meet the switching regulator operation requirements. A switching DC-DC regulator, it is a member of the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. This DC-DC switching regulator operates from a supply voltage of 40V. There are no external factors that affect DC DC switching regulator's consumption of 11mA A of quiescent current.
LM2588S-12 Features
1 outputs
Peak reflow temperature (Cel) of 235
7 pins
Operating supply voltage of 40V
LM2588S-12 Applications
There are a lot of Texas Instruments LM2588S-12 Voltage Regulators applications.
- Post equipment
- Arc suppression circuits
- Balance equipment
- Electric heating, lighting
- Gear/thread machining machines
- Product burn-in
- Milling machines
- Fire elevators
- Sink circuits
- Household control circuits