LM258ADGKR

2 Channels 30mA per Channel 20nA 70 dB Instrumentational OP Amps 0.1μA 16V 3V~32V ±1.5V~16V LM258 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LM258ADGKR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 143
Description: 2 Channels 30mA per Channel 20nA 70 dB Instrumentational OP Amps 0.1μA 16V 3V~32V ±1.5V~16V LM258 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-25°C~85°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	LM258
Pin Count	8
Operating Supply Voltage	16V
Power Supplies	+-1.5/+-15/3/30V
Number of Channels	2
Operating Supply Current	1mA
Nominal Supply Current	1.2mA
Output Current	30mA
Slew Rate	0.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	70 dB
Current - Input Bias	20nA
Voltage - Supply, Single/Dual (±)	3V~32V ±1.5V~16V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	3mV
Bandwidth	700 kHz
Unity Gain BW-Nom	700 kHz
Voltage Gain	100dB
Average Bias Current-Max (IIB)	0.1μA
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	2mV
Low-Bias	NO
Micropower	NO
Programmable Power	NO
Power	NO
Input Offset Current-Max (IIO)	0.015μA
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM258ADGKR Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called General Purpose-types. A Cut Tape (CT) case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -25°C~85°C . Using an 1mA supply current, this operational amplifier ics can be operated. 100dB should remain the voltage gain. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 16V. To pack the operational amplifier ics, TR is adopted as the packing method.