LM258H
| Parameters | |
|---|---|
| Height | 5.72mm |
| Length | 9.08mm |
| Width | 9.08mm |
| Thickness | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-205AA, TO-5-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | -25°C~85°C |
| Packaging | Bulk |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 550mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LM258 |
| Pin Count | 8 |
| Operating Supply Voltage | 16V |
| Number of Elements | 2 |
| Power Supplies | +-1.5/+-15/3/30V |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 500μA |
| Power Dissipation | 550mW |
| Output Current | 30mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 5mV |
| Gain Bandwidth Product | 1MHz |
| Unity Gain BW-Nom | 700 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
LM258H Overview
The linear amplifier is packaged in a TO-205AA, TO-5-8 Metal Can case. This is a General Purpose type op amp. Upon delivery, op amp ic is packaged in a Bulk case. In recent months, the number of terminations has approached 8. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 5mV voltage. Through Hole is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -25°C~85°C for optimal performance. A supply current of 1mA can be used to operate this linear amplifier. Maintain 100dB as the voltage gain. A voltage rating of 2 is indicated for the op amp's operating supply voltage. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
LM258H Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM258H Applications
There are a lot of Texas Instruments LM258H Instrumentational OP Amps applications.
- Blood pressure sensors
- Multiplication circuits
- Addition operation circuits
- Weighing systems
- Commercial audio systems
- Television broadcasting equipment
- RF cable systems
- Signal filtering
- Industrial control system
- Hand-held batteries
