LM258WYDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM258 |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Operating Supply Current | 700μA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.1MHz |
| Unity Gain BW-Nom | 1100 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| Max Frequency | 100kHz |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.04μA |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
LM258WYDT Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. The total number of pins on linear amplifier is 8. I would like to remind you that this buffer op amp should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 2mV. Surface Mount is the recommended mounting type of operational amplifiers. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. A supply current of 700μA can be used to operate this linear amplifier. You should keep the voltage gain at 100dB for the time being. There are 2 circuits on this op amp. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. The Automotive, AEC-Q100 represents the op amp's series number.
LM258WYDT Features
8 Pins
supply voltage of 5V
100dB voltage gain
LM258WYDT Applications
There are a lot of STMicroelectronics LM258WYDT Instrumentational OP Amps applications.
- Weak signal detection
- Fast A/D and D/A converters
- Band-stop filter
- Mobile phone
- pH (acidity)
- earphone
- Instrumentation
- Medical imaging
- Large motor controllers
- Multimedia playback equipment
