LM2595S-ADJ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Number of Pins | 5 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | LM2595 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 78 % |
| Voltage - Input (Max) | 40V |
| Output Voltage | 37V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 40V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Max Output Voltage | 37V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 150kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.2V |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2595S-ADJ/NOPB Overview
It uses the Tube package in order to optimize the performance of this voltage regulator. In this voltage regulator, 5 terminations are present. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a TO-263-6, D2Pak (5 Leads + Tab), TO-263BA package to save space. In this case, DC DC switching regulator has 1 outputs configured to it. This DC DC switching regulator generates Adjustable output on its output pins. Surface Mount-mounting is compatible with this switching regulator. As long as its operating temperature is -40°C~125°C TJ, dc to dc voltage regulator should perform well. DC-DC switching regulators reach 150kHz switching frequencies. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 4.5V. 40V volts is DC DC switching regulator's maximum input voltage. With its peak reflow temperature of 245, this voltage regulator is essentially indestructible. An input voltage of 12V is required to meet the requirements of the switching regulator operation. In this case, the DC/DC regulator belongs to the family LM2595. Voltage of voltage regulator can be delivered at 37V volts. In order to operate voltage regulator, there are 5 pins that must be connected. For this switching regulator, we recommend keeping the output voltage at at least 1.2V volts. Switching regulator has a maximum output current of 1A A, which is sufficient to meet the requirements of operation. A maximum voltage of 37V can be obtained from the regulator voltage. Known as a switching DC-DC regulator, this voltage regulator belongs to the SIMPLE SWITCHER? family. DC-DC switching regulator with supply voltage 40V. Voltage regulator consumes 5mA A of quiescent current without being affected by external factors.
LM2595S-ADJ/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
5 pins
Operating supply voltage of 40V
LM2595S-ADJ/NOPB Applications
There are a lot of Texas Instruments LM2595S-ADJ/NOPB Voltage Regulators applications.
- Machining centers
- Servo drive system
- Direct power supply system
- Large fire protection systems
- Production lines
- Window air conditioners
- Balance equipment
- Alternators
- Mobile phones
- SMT equipment
