LM2597N-12/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Base Part Number | LM2597 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 88 % |
| Output Voltage | 12V |
| Output Type | Fixed |
| Max Output Current | 500mA |
| Operating Supply Voltage | 40V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Voltage - Output (Min/Fixed) | 12V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 150kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 12V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2597N-12/NOPB Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, there are a total of 8 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called SWITCHING REGULATOR. There is a 8-DIP (0.300, 7.62mm) package available for this voltage regulator, as DC DC switching regulator is space-saving. In this case, DC DC switching regulator has 1 outputs configured to it. Fixed outputs are generated on the output pins of this adjusting voltage regulator. This switching regulator is designed to fit the Through Hole mounting system. Voltage regulators should be operated at -40°C~125°C TJ temperature while operating. This DC-DC switching regulator has a switching frequency of 150kHz. This voltage regulator is able to operate with the minimal input voltage of 4.5V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 12V. To meet the switching regulator operation requirements, a nominal input voltage of 24V is provided. LM2597 is a family of voltage regulators that belong to the DC/DC industry. A voltage of 12V volts can be generated by DC DC switching regulator. There are 8 pins that are used for the operation of the voltage regulator 12v. Ideally this switch regulator should have an output voltage of about 12V at the very least. The maximum output current reaches 500mA A to meet the switching regulator operation requirements. The switching DC-DC regulator belongs to the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. DC-DC switching regulator with supply voltage 40V. There is no external influence on harley voltage regulator as it consumes 5mA A of quiescent current.
LM2597N-12/NOPB Features
1 outputs
8 pins
Operating supply voltage of 40V
LM2597N-12/NOPB Applications
There are a lot of Texas Instruments LM2597N-12/NOPB Voltage Regulators applications.
- Electrical distribution systems
- Computed tomography (CT)
- Correction machines
- Flaw detection equipment
- Constant current circuits
- Boring machines
- Laboratories
- Emergency lighting monitoring equipment
- Access control systems
- Arc suppression circuits
