LM2598S-5.0/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | LM2598 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 82 % |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 1A |
| Operating Supply Voltage | 40V |
| Voltage - Input (Min) | 4.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Max Output Voltage | 5V |
| Voltage - Output (Min/Fixed) | 5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 150kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Height | 4.65mm |
| Length | 10.1mm |
| Width | 8.89mm |
| Thickness | 4.44mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2598S-5.0/NOPB Overview
For optimal performance, this voltage regulator uses the Tube package. There are 7 terminations in this voltage regulator. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package. DC DC switching regulator is configured with 1 outputs. The adjusting voltage regulator generates Fixed output. Switching regulators like this one can be mounted on the Surface Mount mounting system. The operating temperature should be kept at -40°C~125°C TJ when the voltage regulator 12v is in operation. There is a switching frequency of 150kHz for this voltage regulator 12v. The voltage regulator can be operated with a voltage as low as 4.5V as an input voltage. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 5V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. DC/DC regulators of this type are part of the LM2598 family of voltage regulator 12vs. The voltage DC DC switching regulator can provide is up to 5V volts. In order to operate voltage regulator, 7 pins are required. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 1A A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 5V. A switching DC-DC regulator, it is a member of the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. An input voltage of 40V is used to operate this harley voltage regulator. Voltage regulator consumes 5mA A of quiescent current without being affected by external factors.
LM2598S-5.0/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
7 pins
Operating supply voltage of 40V
LM2598S-5.0/NOPB Applications
There are a lot of Texas Instruments LM2598S-5.0/NOPB Voltage Regulators applications.
- Correction machines
- Serial communication converter
- Product burn-in
- Automatic testing equipment
- Handheld GPS
- Wind power
- Flexible manufacturing cells
- Pipe bending machines
- Shearing machines
- Servo drive system
