LM2599S-ADJ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Base Part Number | LM2599 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 73 % |
| Output Voltage | 37V |
| Output Type | Adjustable |
| Max Output Current | 3A |
| Operating Supply Voltage | 40V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Max Output Voltage | 37V |
| Voltage - Output (Min/Fixed) | 1.23V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 150kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.2V |
| Voltage - Output (Max) | 37V |
| Height | 4.65mm |
| Length | 10.1mm |
| Width | 8.89mm |
| Thickness | 4.44mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2599S-ADJ/NOPB Overview
It is designed to provide optimal performance by utilizing the Tube package. Throughout this voltage regulator, there are 7 terminations. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. The space-saving TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package is available for this voltage regulator. A total of 1 outputs are configured in this voltage regulator. On its output pins, this adjusting voltage regulator generates Adjustable output. Switching regulators like this one can be mounted on the Surface Mount mounting system. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. There is a switching frequency of 150kHz for this voltage regulator 12v. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. The adjusting voltage regulator's output voltage (Min/Fixed) is 1.23V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. An input voltage of 12V is required for switching regulator operation. As part of the LM2599 series of regulators, the voltage regulators can be found. Voltage can be produced at 37V volts by voltage regulator. There are 7 pins used for switching regulator operation. Ideally this switch regulator should have an output voltage of about 1.2V at the very least. A maximum output current of 3A A is available to meet the switching regulator operation requirements. On the basis of the maximum output voltage of 37V, adjusting voltage regulator can be operated easily. With a maximum output voltage of 37V, DC DC switching regulator has a very high efficiency. Known as a switching DC-DC regulator, this electronic voltage regulator 12v is part of the SIMPLE SWITCHER? family. Switching regulators operate at 40V supply voltages. External factors do not affect voltage regulator's consumption of 5mA A of quiescent current.
LM2599S-ADJ/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
7 pins
Operating supply voltage of 40V
LM2599S-ADJ/NOPB Applications
There are a lot of Texas Instruments LM2599S-ADJ/NOPB Voltage Regulators applications.
- Telecommunications equipment
- Grinders
- Electrical distribution systems
- Remotely powered electric motors
- Serial communication converter
- Product burn-in
- Overvoltage protection circuits in TV sets
- CMM
- Die casting equipment
- Smoke exhaust equipment
