LM2623LD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-WFDFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2623 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 87 % |
| Output Voltage | 14V |
| Output Type | Adjustable |
| Max Output Current | 2A |
| Voltage - Input (Min) | 0.8V |
| Input Voltage-Nom | 3.3V |
| Min Supply Voltage | 800mV |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 16mA |
| Output Configuration | Positive |
| Current - Output | 2.2A Switch |
| Quiescent Current | 80μA |
| Voltage - Output (Min/Fixed) | 1.24V |
| Topology | Boost |
| Frequency - Switching | 300kHz~2MHz |
| Input Voltage (Max) | 5V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Synchronous Rectifier | No |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 800μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2623LD/NOPB Overview
It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. In this voltage regulator, 14 terminations are present. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. There is a 14-WFDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs on DC DC switching regulator. ICs such as this voltage regulator are capable of generating Adjustable outputs through their output pins. A Surface Mount mounting is required for this switching regulator. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. DC-DC switching regulators reach 300kHz~2MHz switching frequencies. Regulator 0.8V can operate with dc to dc voltage regulator's minimum input voltage 0.8V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 1.24V. This voltage regulator 12v features maximum design flexibility thanks to its 2.2A Switch output current. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 3.3V. The LM2623 family of DC/DC regulators includes this DC/DC regulator. The voltage DC DC switching regulator can produce is 14V volts. To operate the voltage regulator 12v, 14 pins are required. Switching regulator has a maximum output current of 2A A, which is sufficient to meet the requirements of operation. Voltage regulator consumes 80μA A of quiescent current without being affected by external factors. In this case, a dc to dc voltage regulator's minimum supply voltage of 800mV volts is required to ensure reliable performance. Input voltages with maximum values of DC DC switching regulator's 5V can be permitted using an innovative technique.
LM2623LD/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
14 pins
LM2623LD/NOPB Applications
There are a lot of Texas Instruments LM2623LD/NOPB Voltage Regulators applications.
- Packaging
- Scientific research
- Industrial robots
- Direct power supply system
- Automation technology
- Wide-range voltage regulation circuits
- Industrial controllers
- Emergency lighting monitoring equipment
- seismic instrument power circuits
- Balance equipment
