LM2653MTC-ADJ
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM2653 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 97 % |
| Voltage - Input (Max) | 14V |
| Output Voltage | 5V |
| Output Type | Adjustable |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 14V |
| Voltage - Input (Min) | 4V |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 1.7mA |
| Max Output Voltage | 5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.5V |
| Switcher Configuration | SINGLE |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2653MTC-ADJ Overview
A Tube package is used in this voltage regulator to optimize performance. A voltage regulator consists of 16 terminations. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHING REGULATOR voltage regulator. In order to save space, this voltage regulator is packaged in the 16-TSSOP (0.173, 4.40mm Width) package. There are 1 outputs on DC DC switching regulator. There are output pins on this DC DC switching regulator that generate Adjustable output. A Surface Mount mounting is required for this switching regulator. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. DC-DC switching regulators reach 300kHz switching frequencies. Input voltage 4V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. Voltage regulator has an input voltage (Max) of 14V. A regulator with this 260 peak reflow temperature is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 10V. In this case, the DC/DC regulator belongs to the family LM2653. Voltage can be produced at 5V volts by voltage regulator. 16 pins are used for switching regulator operation. As a general rule, this voltage regulator 12v should keep its output voltage at least at 1.5V. A 1.5A A maximum output current is required to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is 5V. With 14V as the supply voltage, this DC-DC switching regulator will operate. Voltage regulator consumes 1.7mA A of quiescent current without being affected by outside forces.
LM2653MTC-ADJ Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 14V
LM2653MTC-ADJ Applications
There are a lot of Texas Instruments LM2653MTC-ADJ Voltage Regulators applications.
- Textile machinery
- seismic instrument power circuits
- Industrial controllers
- Special machining machine tools
- Planers
- Household control circuits
- Motor controller circuits
- USB circuits
- Remotely powered electric motors
- Geothermal power
