Parameters |
Output Voltage |
-5.5V |
Output Type |
Fixed |
Max Output Current |
100mA |
Input Voltage-Nom |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.5V |
Analog IC - Other Type |
SWITCHED CAPACITOR CONVERTER |
Operating Supply Current |
1mA |
Output Configuration |
Positive or Negative |
Quiescent Current |
1mA |
Max Output Voltage |
-1.5V |
Voltage - Output (Min/Fixed) |
-Vin 2Vin Vin/2 |
Topology |
Charge Pump |
Logic Function |
Inverting |
Frequency - Switching |
5kHz 40kHz |
Synchronous Rectifier |
No |
Min Output Voltage |
-5.5V |
Switcher Configuration |
DOUBLER INVERTER |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
970μm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Weight |
139.989945mg |
Operating Temperature |
-40°C~85°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Other Analog ICs |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.65mm |
Base Part Number |
LM2660 |
Function |
Ratiometric |
Number of Outputs |
1 |
LM2660MM/NOPB Overview
This harley voltage regulator utilizes the Tape & Reel (TR) package for optimized performance. During the development of this harley voltage regulator, 8 terminations were made. This regulator voltage is equipped with a type of analog integrated circuit that is called a SWITCHED CAPACITOR CONVERTER voltage regulator. In order to save space, this harley voltage regulator is available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. There are 1 outputs on DC DC switching regulator. Fixed outputs are generated on the output pins of this adjusting voltage regulator. Surface Mount-mount switching regulator. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~85°C TJ. DC-DC switching regulators reach 5kHz 40kHz switching frequencies. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to -Vin 2Vin Vin/2. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. For operation, voltage regulator provides a nominal input voltage of 5V. A voltage regulator 12v such as this falls under the Other Analog ICs category and belongs to this category. In this case, the DC/DC regulator belongs to the family LM2660. At -5.5V volts, voltage regulator can provide voltage. 8 pins are used for switching regulator operation. In order for this switching regulator to work properly, the output voltage should be at least -5.5VV. A maximum output current of 100mA A is available to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is -1.5V. Voltage regulator consumes 1mA A of quiescent current without being affected by outside forces. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 1.5V V. The maximum supply voltage for the voltage regulator 12v is 5.5V, so DC DC switching regulator can operate with a maximum voltage of 5.5V. The voltage regulator operates with a supply current of 1mAmps.
LM2660MM/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
LM2660MM/NOPB Applications
There are a lot of Texas Instruments LM2660MM/NOPB Voltage Regulators applications.
- Mobile phones
- Surge protection circuits
- Various precision measuring instruments
- Experimental setup
- Post equipment
- Hydro power
- Solar power plants
- Television equipment
- Current source circuits
- Communication system