LM2670S-5.0
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SIMPLE SWITCHER® |
| JESD-609 Code | e0 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Base Part Number | LM2670 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 88 % |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 3A |
| Operating Supply Voltage | 40V |
| Voltage - Input (Min) | 8V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 4.2mA |
| Voltage - Output (Min/Fixed) | 5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 260kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 5V |
| Height | 4.65mm |
| Length | 10.1mm |
| Width | 8.89mm |
| Thickness | 4.44mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2670S-5.0 Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. There are 7 terminations in this voltage regulator. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. In order to save space, this voltage regulator is packaged in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package. DC DC switching regulator is configured with 1 outputs. Fixed outputs are generated on the output pins of this adjusting voltage regulator. Surface Mount-mounting is compatible with this switching regulator. Keeping dc to dc voltage regulator's operating temperature at -40°C~125°C TJ is essential when operating. A DC-DC switching regulator such as this one switches at 260kHz. A dc to dc voltage regulator's minimum input voltage of 8V is required for this voltage regulator to operate. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 5V. With its peak reflow temperature of 235, this voltage regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 12V as the nominal input voltage. As part of the LM2670 series of regulators, the voltage regulators can be found. Voltage of voltage regulator can be delivered at 5V volts. During switching regulator operation, 7 pins are used. The output voltage for this switching regulator should be kept at 5V at least. A 3A A maximum output current is required to meet the switching regulator operation requirements. A switching DC-DC regulator, it is a member of the SIMPLE SWITCHER? family of electronic voltage regulator 12vs. 40V is the supply voltage for this DC-DC switching regulator. No external factors affect how much current harley voltage regulator consumes.
LM2670S-5.0 Features
1 outputs
Peak reflow temperature (Cel) of 235
7 pins
Operating supply voltage of 40V
LM2670S-5.0 Applications
There are a lot of Texas Instruments LM2670S-5.0 Voltage Regulators applications.
- Various precision measuring instruments
- seismic instrument power circuits
- Motor controller circuits
- Computer monitoring equipment of building
- Magnetohydrodynamic power
- Flaw detection equipment
- Direct power supply system
- Balance equipment
- Shearing machines
- Printing equipment
