Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
Number of Pins |
7 |
Weight |
113.398093g |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
Series |
SIMPLE SWITCHER® |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
7 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
245 |
Frequency |
260kHz |
Base Part Number |
LM2676 |
Function |
Step-Down |
Number of Outputs |
1 |
Efficiency |
88 % |
Output Voltage |
5V |
Output Type |
Fixed |
Max Output Current |
3A |
Input Voltage-Nom |
12V |
Max Supply Voltage |
40V |
Min Supply Voltage |
8V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
3A |
Quiescent Current |
4.2mA |
Max Output Voltage |
5.1V |
Topology |
Buck |
Control Mode |
VOLTAGE-MODE |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
No |
Min Output Voltage |
4.9V |
Nominal Output Voltage |
5V |
Height |
4.65mm |
Length |
10.1mm |
Width |
8.89mm |
Thickness |
4.44mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
LM2676S-5.0/NOPB Overview
A Tube package is used in this voltage regulator to optimize performance. Throughout this voltage regulator, there are 7 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHING REGULATOR. In order to save space, this harley voltage regulator is available in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package. The voltage regulator is configured with 1 outputs. This DC DC switching regulator generates Fixed output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. This voltage regulator 12v should operate at a temperature of -40°C~125°C TJ when operating. This voltage regulator 12v features maximum design flexibility thanks to its 3A output current. 245 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. To meet the switching regulator operation requirements, a nominal input voltage of 12V is provided. DC/DC regulators of this type are part of the LM2676 family of voltage regulator 12vs. A voltage of 5V volts can be generated by DC DC switching regulator. To operate the voltage regulator 12v, 7 pins are required. As a general rule, this voltage regulator 12v should keep its output voltage at least at 4.9V. The maximum output current reaches 3A A to meet the switching regulator operation requirements. With a maximum output voltage of 5.1V, DC DC switching regulator has a very high efficiency. As a member of the SIMPLE SWITCHER? family of DC/DC regulators, this part is prominent in many specifications. There is no external influence on harley voltage regulator as it consumes 4.2mA A of quiescent current. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 8V V. There is a maximum supply voltage of 40V at which DC DC switching regulator can operate. A frequency of 260kHz enables dc to dc voltage regulator to maintain high accuracy.
LM2676S-5.0/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 245
7 pins
LM2676S-5.0/NOPB Applications
There are a lot of Texas Instruments LM2676S-5.0/NOPB Voltage Regulators applications.
- Current source circuits
- Balance equipment
- Precision electronic equipment
- Experimental setup
- Computer application technology
- seismic instrument power circuits
- Surge protection circuits
- Power supplies of electronic gadgets
- Thermal power
- Pipe bending machines