LM2687LDX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2687 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | -1.5V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.7V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Nominal Supply Current | 500μA |
| Output Configuration | Negative |
| Current - Output | 10mA |
| Quiescent Current | 500μA |
| Max Output Voltage | -5.2V |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 110kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | -1.5V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2687LDX/NOPB Overview
This harley voltage regulator utilizes the Tape & Reel (TR) package for optimized performance. Throughout this voltage regulator, there are 8 terminations. A SWITCHED CAPACITOR REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. The space-saving 8-WFDFN Exposed Pad package is available for this voltage regulator. The voltage regulator 12v has 1 outputs. There are output pins on this DC DC switching regulator that generate Adjustable output. This switching regulator is designed to fit the Surface Mount mounting system. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. DC-DC switching regulators reach 110kHz switching frequencies. Input voltage 2.7V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. Featuring a maximum design flexibility of 10mA, dc to dc voltage regulator has a maximum output current of 10mA. The maximum input voltage of voltage regulator is 5.5V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. As a result of DC DC switching regulator's design, it is designed to provide an input voltage of 3.6V for the purposes of operation. There is a subcategory of this regulator voltage called Other Analog ICs. In this case, the DC/DC regulator belongs to the family LM2687. Voltage can be produced at -1.5V volts by voltage regulator. To operate the voltage regulator 12v, 8 pins are required. There should be at least a -1.5V volt output voltage for this switching regulator in order to make it work properly. It provides the adjusting voltage regulator's maximal output voltage of -5.2V. External factors do not affect voltage regulator's consumption of 500μA A of quiescent current.
LM2687LDX/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
LM2687LDX/NOPB Applications
There are a lot of Texas Instruments LM2687LDX/NOPB Voltage Regulators applications.
- Emergency lighting monitoring equipment
- Fire elevators
- Magnetohydrodynamic power
- Automatic testing equipment
- Mobile phones
- Thermal power
- Milling machines
- Handheld GPS
- Series voltage regulation circuits
- Balance equipment
