LM2687MM/NOPB
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2687 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -1.5V |
| Output Type | Adjustable |
| Max Output Current | 10mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Operating Supply Current | 500μA |
| Output Configuration | Negative |
| Quiescent Current | 500μA |
| Max Output Voltage | -1.5V |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Frequency - Switching | 110kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | -5.2V |
| Switcher Configuration | DOUBLER INVERTER |
| Voltage - Output (Max) | -5.2V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2687MM/NOPB Overview
Using the Cut Tape (CT) package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, there are 8 terminations. The type of analog IC that this voltage regulator is equipped with is SWITCHED CAPACITOR REGULATOR. There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs configured on the voltage regulator. There are output pins on this DC DC switching regulator that generate Adjustable output. Switching regulators like this one can be mounted on the Surface Mount mounting system. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. In this voltage regulator 12v, the switching frequency is 110kHz. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. To meet the switching regulator operation requirements, a nominal input voltage of 3.6V is provided. There is a subcategory of this regulator voltage called Other Analog ICs. DC/DC regulators of this type are part of the LM2687 family of voltage regulator 12vs. A voltage of -1.5V volts can be produced by voltage regulator. 8 pins are used for switching regulator operation. This voltage regulator 12v should be configured with an output voltage that is at least -5.2V. A 10mA A maximum output current is required to meet the switching regulator operation requirements. By using the -5.2V's maximal output voltage, adjusting voltage regulator can operate easily. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is -1.5V, which is the highest available. Without external influences, harley voltage regulator consumes 500μAA of quiescent current. By requiring a minimum voltage of 2.7VV, adjusting voltage regulator reliable performance is guaranteed. As long as the supply voltage is greater than 5.5V, the voltage regulator 12v will operate correctly. Powered by a 500μA supply current, this DC-DC switching regulator operates on a DC-DC voltage.
LM2687MM/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
LM2687MM/NOPB Applications
There are a lot of Texas Instruments LM2687MM/NOPB Voltage Regulators applications.
- Solar power plants
- Geothermal power
- Shearing machines
- seismic instrument power circuits
- Packaging
- SMT equipment
- Photovoltaic power
- Power supplies of electronic gadgets
- Direct power supply system
- ATMs
