LM2703MF-ADJ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM2703 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Output Type | Adjustable |
| Max Output Current | 350mA |
| Operating Supply Voltage | 7V |
| Input Voltage-Nom | 2.2V |
| Nominal Supply Current | 235μA |
| Output Current | 350mA |
| Quiescent Current | 235μA |
| Max Output Voltage | 21V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.2V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 7V |
| Control Technique | CONSTANT OFF TIME |
| Current - Output / Channel | 350mA Switch |
| Internal Switch(s) | Yes |
| Voltage - Supply (Min) | 2.2V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2703MF-ADJ/NOPB Overview
SC-74A, SOT-753 package saves space on the board. In LED drivers, the outputs are all set to 1.This mounting method is Surface Mount.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.The LED driver is capable of operating at a temperature of -40°C~125°C TJ.Backlight has many advantages.It operates with terminations of 5.This module has 5 pins as its base.A voltage supply below 2.2V may cause undetermined failures.It's mounted by Surface Mount.The LED driver is based on part number LM2703.On it, there are 5 pins.The minimal input voltage is 2.2V.It reaches 7V when the maximum supply current is allowed.In this case, the load can only be supplied with 350mA current.Powering systems requires 7V voltages.LED drivers deliver all their benefits with a maximum output current of 350mA.The consumption of current is 235μAin the absence of external factors.It is recommended that the output voltage be no higher than 21V.When the device is operated, it has 2.2V volts assigned to it.There is an output type of Adjustable on this device.
LM2703MF-ADJ/NOPB Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~125°C TJ
Operating with the supply voltage of 7V
LM2703MF-ADJ/NOPB Applications
There are a lot of Texas Instruments LM2703MF-ADJ/NOPB LED Driver ICs applications.
- Stage Lighting and Signage
- Street lighting
- Other Electronic Devices
- Sports Facility Lighting
- General lighting
- Flicker-free LED Lighting using R1580N
- Down lights
- Amusement Machines
- Dimmable LED for vehicle interiors
- OLED power supply for portable equipment
