LM2705MF-ADJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Backlight |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.2V |
| Base Part Number | LM2705 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Output Voltage | 20.5V |
| Output Type | Adjustable |
| Max Output Current | 150mA |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 2.2V |
| Nominal Supply Current | 235μA |
| Output Current | 150mA |
| Quiescent Current | 235μA |
| Max Output Voltage | 20V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.2V |
| Max Input Voltage | 7V |
| Control Technique | CONSTANT OFF TIME |
| Internal Switch(s) | Yes |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2705MF-ADJ Overview
SC-74A, SOT-753 saves board space. It has 1 outputs for LED drivers.The mounting method is Surface Mount.When it emerges as a DC DC Regulator, it shows high-performance and reliability.It is capable of working normally at -40°C~85°C TA.Backlight has significant advantages.In this case, the terminations are set to 5.This module has 5 pins as its base.The mount is in the direction of Surface Mount.It's under the LM2705 base part number.An acceptable maximum value for the supply voltage is 7V.In addition, it has 5 pins.Further, it can be classified as Other Analog ICs based on its characteristics.This device operates with a minimum input voltage of 2.2V volts.As a result, it runs at a minimal voltage of 2.2V in order to achieve the best efficiency.The allowable maximum value of supply current reaches 7V.A load can be supplied with 150mA current.Even when operating at a maximal output current of 150mA, it is capable of delivering all the benefits of a LED driver.There is no external factor that can consume current, so 235μA current is consumed.This device produces a voltage of 20.5V as its output.20V should be the maximum output voltage.There is a type Adjustable output on this device.
LM2705MF-ADJ Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~85°C TA
Supply voltage of 2.2V
Output voltage of 20.5V
LM2705MF-ADJ Applications
There are a lot of Texas Instruments LM2705MF-ADJ LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- Stage and Studio lighting
- Linear fluorescent
- General lighting
- Portable lighting
- Flicker-free LED Lighting using R1580N
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- OLED power supply for portable equipment
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
