LM2705MF-ADJ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM2705 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Output Type | Adjustable |
| Max Output Current | 175mA |
| Operating Supply Voltage | 7V |
| Nominal Supply Current | 235μA |
| Output Current | 150mA |
| Quiescent Current | 235μA |
| Max Output Voltage | 20V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.2V |
| Max Input Voltage | 7V |
| Control Technique | CONSTANT OFF TIME |
| Internal Switch(s) | Yes |
| Voltage - Supply (Min) | 2.2V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2705MF-ADJ/NOPB Overview
In order to save board space, the led driver uses the SC-74A, SOT-753 package. LED drivers are designed with 1 outputs.Surface Mount is used for mounting.It is highly reliable and high-performing when it emerges as a DC DC Regulator.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.It provides considerable benefits for Backlight.The operation of this system is supported by 5 terminations.This LED driver is configured with a base of 5 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 2.2V.As you can see, it is mounted by Surface Mount.Under the base part number LM2705, you'll find this LED driver.It consists of 5 pins.The minimum input voltage for this device is 2.2V.It is possible to supply current up to 7V.150mA is the maximum current the load can handle.Powering systems requires an internal voltage of 7V.A LED driver that operates at 175mA output current provides all the benefits of a LED driver.No external factors cause 235μA current to be consumed.It is important that the output voltage does not exceed 20V.This device has a Adjustable output type.
LM2705MF-ADJ/NOPB Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 7V
LM2705MF-ADJ/NOPB Applications
There are a lot of Texas Instruments LM2705MF-ADJ/NOPB LED Driver ICs applications.
- Scanners and Handy Terminals
- Street lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Medical surgery lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED Lightings for Inspection Devices
- LED Lightings for Industrial Equipment
- Linear fluorescent
- Gallery lighting
- Stage Lighting and Signage
