LM2705MFX-ADJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Backlight |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | LM2705 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 80 % |
| Output Voltage | 20.5V |
| Operating Supply Voltage | 7V |
| Nominal Supply Current | 235μA |
| Quiescent Current | 235μA |
| Voltage - Output | 20V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.2V |
| Max Input Voltage | 7V |
| Control Technique | CONSTANT OFF TIME |
| Current - Output / Channel | 150mA |
| Internal Switch(s) | Yes |
| Voltage - Supply (Min) | 2.2V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2705MFX-ADJ Overview
The SC-74A, SOT-753 package conserves board space. In this LED driver, there are 1 outputs.The mounting method adopted is Surface Mount.In this case, it emerges as a DC DC Regulator with a high efficiency.It is possible for the led driver ic to operate normally at -40°C~85°C TA.There are considerable benefits for Backlight.The terminations 5 are designed for its operation.The configuration of the board is built around 5 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 2.2V.It's mounted by Surface Mount.The LED driver is available under the part number LM2705.The output voltage is 20V.The device has 5 pins.According to its characteristics, it is also classified into Other Analog ICs.The input voltage must be minimally 2.2V.Supply current cannot exceed 7V.There is 7V internal voltage required to power systems.No external factors cause 235μA current to be consumed.A 20.5V voltage is output by it.
LM2705MFX-ADJ Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 7V
Output voltage of 20.5V
LM2705MFX-ADJ Applications
There are a lot of Texas Instruments LM2705MFX-ADJ LED Driver ICs applications.
- General lighting
- Down lights
- Other Electronic Devices
- LED Lightings for Industrial Equipment
- LED Lighting PFCs, Linear Dimmable
- Portable lighting
- High-end retail lighting
- Stage Lighting and Signage
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED Lightings for Inspection Devices
