LM27213MTD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -5°C~105°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM27213 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.708V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~6V |
| Quiescent Current | 3mA |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 6V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Switching Frequency | 400kHz |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM27213MTD/NOPB Overview
Capsuled in the 48-TFSOP (0.240, 6.10mm Width) package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. This dc control operates at 4.75V~6V and has a 4.75V~6V supply voltage. Suitable for working in an dc switcher that has a -5°C~105°C TA. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Enable, Power Good, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 48 terminations. It includes HYSTERETIC CURRENT MODE as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 5V. In addition to "LM27213", there are other relevant dc to dc converter ics you can find. There are 48 pins on switching converter. It is recommended to use 4.75V as the minimum input voltage of dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 1.708V. At most, the dc to dc regulator accepts 6V input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. The Surface Mount makes DC switcher suitable for most applications and prototypes. To operate the voltage regulator dc to dc safely and reliably, users should apply 30V. DC switchings that are dormant use 3mA. At 400kHz, this controller will mostly work as expected.
LM27213MTD/NOPB Features
Transistor Driver Outputs
Current Limit, Enable, Power Good, Soft Start
HYSTERETIC CURRENT MODE
Switching Frequency: 400kHz
LM27213MTD/NOPB Applications
There are a lot of Texas Instruments LM27213MTD/NOPB DC to DC converter applications.
- Terrestrial set-top boxes
- CNC system
- Precision electronic equipment
- Constant current circuits
- SMT equipment
- CMM
- Pipe bending machines
- Special machining machine tools
- Electrical distribution systems
- Boring machines
