LM27213MTDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -5°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM27213 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.708V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~6V |
| Quiescent Current | 3mA |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Input Voltage (Min) | 5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency | 400kHz |
| Clock Sync | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM27213MTDX Overview
Capsuled in the 48-TFSOP (0.240, 6.10mm Width) package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 4.75V~6V volts and has 4.75V~6V supply voltage. Suitable for a -5°C~105°C TA dc switcher. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Current Limit, Enable, Power Good, Soft Start which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 48 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. Other relevant dc to dc converter ics will be returned if you search "LM27213". There are only 48 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the input voltage of the dc dc voltage regulator be 5V. DC regulator outputs 1.708V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 25A, so note that when you start the project. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 30V. The dc switching utilizes 3mA when it is in a dormant state. When this switching controller is running at frequency 400kHz, it can perform well in most cases.
LM27213MTDX Features
Transistor Driver Outputs
Current Limit, Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Switching Frequency: 400kHz
LM27213MTDX Applications
There are a lot of Texas Instruments LM27213MTDX DC to DC converter applications.
- Scientific research
- Plate bending machines
- Computer rooms
- Precision electronic equipment
- Remotely powered electric motors
- Sensitive electronic devices
- Automatic testing equipment
- Balance equipment
- SMT equipment
- Large fire protection systems
