LM27213MTDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -5°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM27213 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.708V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~6V |
| Quiescent Current | 3mA |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Input Voltage (Min) | 5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency | 400kHz |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM27213MTDX/NOPB Overview
As a result of 48-TFSOP (0.240, 6.10mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. The system can process Transistor Driver dc switching's outputs (s). dc controls with 4.75V~6V voltage are supplied and operated. Qualified to work in an dc switcher with -5°C~105°C TA. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Power Good, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 48. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. You can find other relevant dc to dc converter ics by searching "LM27213". 48 pins are on switching converter. The minimum input voltage of the dc dc voltage regulator should be 5V. According to the test statistics, DC regulator outputs 1.708V voltage. In most cases, the dc dc regulator's output current is 25A. This information should be noted when you begin working with the component. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Users should apply 30V to operate the voltage regulator dc to dc safely and reliably. The dc switching utilizes 3mA when it is in a dormant state. In most cases, this controller will perform well at frequency 400kHz.
LM27213MTDX/NOPB Features
Transistor Driver Outputs
Current Limit, Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Switching Frequency: 400kHz
LM27213MTDX/NOPB Applications
There are a lot of Texas Instruments LM27213MTDX/NOPB DC to DC converter applications.
- Ball screw pair
- Serial communication converter
- Automatic testing equipment
- Sensitive electronic devices
- Large fire protection systems
- Precision electronic equipment
- Access control systems
- Machining centers
- Terrestrial set-top boxes
- Fire elevators
