LM27213SQ/NOPB
| Parameters | |
|---|---|
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM27213 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.708V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~6V |
| Quiescent Current | 3mA |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 6V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Switching Frequency-Max | 400kHz |
| Clock Sync | No |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -5°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
LM27213SQ/NOPB Overview
It comes in the 48-WFQFN Exposed Pad package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control operates at 4.75V~6V and has a 4.75V~6V supply voltage. Suitable for work in a -5°C~105°C TA dc switcher. The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Current Limit, Enable, Power Good, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. QUAD are the position of the terminal of the switching converters. Various 48 terminations. These dc dc converter ics adapt several control methods, including HYSTERETIC CURRENT MODE. DC switcher's input voltageis 5V volts. A search for "LM27213" will reveal other relevant dc to dc converter ics. 48 pins are on switching converter. dc dc voltage regulators should have a minimum input voltage of 4.75V. According to the test statistics, DC regulator outputs 1.708V voltage. The dc to dc regulator can only accept a maximum input voltage of 6V. If you start a project, note down the dc dc regulator's usual output current of 25A. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 30V. The dc switching utilizes 3mA when it is in a dormant state. The top frequency at which this switching controller can switch is 400kHz.
LM27213SQ/NOPB Features
Transistor Driver Outputs
Current Limit, Enable, Power Good, Soft Start
HYSTERETIC CURRENT MODE
LM27213SQ/NOPB Applications
There are a lot of Texas Instruments LM27213SQ/NOPB DC to DC converter applications.
- Terrestrial set-top boxes
- Household control circuits
- Game consoles
- SMT equipment
- Communication system
- Surge protection circuits
- Computer application technology
- USB circuits
- Textile machinery
- Alternators
