LM27213SQX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -5°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM27213 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.708V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 30V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 4.75V~6V |
| Quiescent Current | 3mA |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Input Voltage (Min) | 4.75V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 6V |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Switching Frequency-Max | 400kHz |
| Clock Sync | No |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM27213SQX/NOPB Overview
Capsuled in the 48-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control operates at 4.75V~6V and has a 4.75V~6V supply voltage. Suitable for work in a -5°C~105°C TA dc switcher. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Power Good, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. 48 terminations with various dc switching's functions. These dc dc converter ics adapt a variety of control techniques, including HYSTERETIC CURRENT MODE. DC switcher's input voltageis 5V volts. You can find other relevant dc to dc converter ics by searching "LM27213". There are only 48 pins on switching converter. 4.75V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 1.708V voltage. The dc to dc regulator can only accept 6V input voltage. If you start a project, note down the dc dc regulator's usual output current of 25A. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. To operate the voltage regulator dc to dc safely and reliably, users should apply 30V. When the dc switching is dormant, it uses 3mA. In this switching controller, 400kHz represents the top frequency at which it can switch.
LM27213SQX/NOPB Features
Transistor Driver Outputs
Current Limit, Enable, Power Good, Soft Start
HYSTERETIC CURRENT MODE
LM27213SQX/NOPB Applications
There are a lot of Texas Instruments LM27213SQX/NOPB DC to DC converter applications.
- Laboratories
- PSRR circuits
- Hydraulic presses
- Medical equipment
- Pipe bending machines
- Ball screw pair
- Alternators
- Constant current circuits
- Cutting machine tools
- Household control circuits
