LM2726MX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 720mW |
| Technology | CMOS |
| Voltage - Supply | 4V~7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LM2726 |
| Pin Count | 8 |
| Max Output Current | 3.2A |
| Power Supplies | 5V |
| Nominal Supply Current | 250μA |
| Power Dissipation | 720mW |
| Output Current | 3.2A |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Rise Time | 17ns |
| Fall Time (Typ) | 14 ns |
| Rise / Fall Time (Typ) | 17ns 12ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3.2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.25V 2.4V |
| High Side Voltage - Max (Bootstrap) | 42V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2726MX/NOPB Overview
Its 8-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.A packaging method of Tape & Reel (TR) is indicated.For its configuration, it incorporates 2 drivers.The device is mounted in the direction of Surface Mount.Gate drivers is able to show Gate driverss superiorGate driversy on the basis of a supply voltage of 4V~7V.Gate type N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of 0°C~125°C TJ.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration starts with 8 terminations.You will find various related parts under the base part number LM2726.Mounting the device requires Surface Mount.As a result, it is configured with 8 pins when it is designed.In addition, it is specifically designed to operate with a supply voltage of 5V.An output current as high as 3.2A can be achieved at maximum power.Several electronic components are included in its subcategory of MOSFET Drivers.The number of component pins is 8.High-side voltage - Max (Bootstrap) can be as low as 42V.This device supports a current output of 3.2A at the output.According to its maximum power dissipation, 720mW is capable of conducting and transferring a large amount of power without overheating.Keeping the supply current at 250μA ensures greater stability.Due to its power supplies of 5V, it solves the power supply problem for a wide range of applications.
LM2726MX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 42V
Maximum power dissipation of 720mW
LM2726MX/NOPB Applications
There are a lot of Texas Instruments LM2726MX/NOPB gate drivers applications.
- RGB applications
- Topologies
- High-speed communications
- Motor controllers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Commercial and agricultural vehicles (CAV)
- DC-DC Converters
- Isolated Supplies for controller area network (CAN),
- Broadcast equipment
- Active Clamp Flyback or Forward and Synchronous Rectifier
