LM2727MTCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM2727 |
| Function | Step-Down |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 2.2V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2MHz |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2727MTCX Overview
In the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~5.5V. Work well in dc switchers with a -40°C~125°C TJ. With this switching controller, you can switch at 50kHz~2MHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Various 14 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 5V. LM2727 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 14 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. dc dc voltage regulators should have a minimum input voltage of 2.2V. DC regulator outputs 5V voltage according to the test statistics. If you start a project, note down the dc dc regulator's usual output current of 20A. Voltage regulator dc to dc is designed to operate at 90 % duty cycle during power-ups and power-downs to ensure reliability. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. There is a maximum frequency of 2MHz for this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 16V to the voltage regulator dc to dc. When the dc switching is dormant, it uses 1.5mA. Phases of this controller are 1.
LM2727MTCX Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
LM2727MTCX Applications
There are a lot of Texas Instruments LM2727MTCX DC to DC converter applications.
- Boring machines
- CNC system
- Gear/thread machining machines
- Remotely powered electric motors
- Pipe bending machines
- Nuclear power plants
- Power supplies of electronic gadgets
- Cutting machine tools
- Computer application technology
- Machining centers
