LM27342QMY/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM27342 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 20V |
| Output Voltage | 18V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 2A |
| Quiescent Current | 2.4mA |
| Voltage - Output (Min/Fixed) | 1V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM27342QMY/NOPB Overview
For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. During the development of this harley voltage regulator, 10 terminations were made. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. Space savings are achieved by placing this voltage regulator in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. DC DC switching regulator is configured with 1 outputs. There are output pins on this DC DC switching regulator that generate Adjustable output. A Surface Mount mounting is required for this switching regulator. -40°C~125°C TJ should be the operating temperature when voltage regulator is operating. DC-DC switching regulators reach 2MHz switching frequencies. Input voltage 3V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 1V. It features maximum design flexibility due to dc to dc voltage regulator's 2A output current. 20V volts is DC DC switching regulator's maximum input voltage. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 12V for operation. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. LM27342 is a family of voltage regulators that belong to the DC/DC industry. The voltage DC DC switching regulator can provide is up to 18V volts. To operate the voltage regulator 12v, 10 pins are required. In the Automotive, AEC-Q100 family, this part palys an important role in DC DC switching regulator's traget applications. Voltage regulator consumes 2.4mA A of quiescent current without being affected by outside forces. With this voltage regulator, you will be able to operate it from a 12V V supply voltage.
LM27342QMY/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
LM27342QMY/NOPB Applications
There are a lot of Texas Instruments LM27342QMY/NOPB Voltage Regulators applications.
- Current source circuits
- Large fire protection systems
- Digital precision reference circuits
- Post equipment
- Wind power
- Packaging
- Game consoles
- Digital display device
- Computer application technology
- Low output voltage switching power supply circuits
