LM2736YMKX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Base Part Number | LM2736 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 18V |
| Output Voltage | 16V |
| Output Type | Adjustable |
| Max Output Current | 750mA |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.5mA |
| Output Configuration | Positive |
| Quiescent Current | 1.5mA |
| Max Output Voltage | 16V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.25V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2736YMKX/NOPB Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. This harley voltage regulator has 6 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. There is a SOT-23-6 Thin, TSOT-23-6 package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs on DC DC switching regulator. The adjusting voltage regulator generates Adjustable output. Switching regulators like this one can be mounted on the Surface Mount mounting system. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. In this voltage regulator 12v, the switching frequency is 550kHz. Despite its low input voltage, this voltage regulator can operate. 18V volts is DC DC switching regulator's maximum input voltage. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. For operation, switching regulator requires a nominal input voltage of 5V. In this case, the DC/DC regulator belongs to the family LM2736. At 16V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 6 pins are required. As a general rule, this voltage regulator 12v should keep its output voltage at least at 1.25V. Switching regulator has a maximum output current of 750mA A, which is sufficient to meet the requirements of operation. With a maximum output voltage of 16V, DC DC switching regulator has a very high efficiency. Voltage regulator consumes 1.5mA A of quiescent current without being affected by outside forces. By requiring a minimum voltage of 3VV, adjusting voltage regulator reliable performance is guaranteed.
LM2736YMKX/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
LM2736YMKX/NOPB Applications
There are a lot of Texas Instruments LM2736YMKX/NOPB Voltage Regulators applications.
- Domestic water pumps
- Lathes
- Alternators
- Series voltage regulation circuits
- Energy management systems
- Smoke prevention equipment
- Printing equipment
- Linear guide
- Die casting equipment
- Computer-related products
