LM2737MTC/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM2737 |
| Function | Step-Down |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 2.2V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2MHz |
| Max Duty Cycle | 90 % |
| Clock Sync | No |
| Number of Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2737MTC/NOPB Overview
It comes in the 14-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. Tube solid enclosure protects the pmic. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~5.5V and has a 4.5V~5.5V supply voltage. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. It can switch at 50kHz~2MHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start for efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of dc switching's functions can be performed on 14 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 5V is input. A search for "LM2737" will reveal other relevant dc to dc converter ics. There are a total of 14 pins on switching converter. Input voltage of dc dc voltage regulator should be 2.2V. The test statistics indicate that DC regulator outputs a voltage of 5V. If you start a project, note down the dc dc regulator's usual output current of 20A. voltage regulator dc to dcs with a 90 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is a maximum frequency of 2MHz on this dc regulators. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 16V. In a dormant state, the dc switching uses 1.5mA. The phase of this controller is 1.
LM2737MTC/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
LM2737MTC/NOPB Applications
There are a lot of Texas Instruments LM2737MTC/NOPB DC to DC converter applications.
- Pipe bending machines
- Computer-related products
- Lathes
- Low output voltage switching power supply circuits
- Window air conditioners
- Experimental setup
- Handheld GPS
- Drilling machines
- Surface processing equipment
- Textile machinery
