LM2737MTCX/NOPB
| Parameters | |
|---|---|
| Output Type | Transistor Driver |
| Operating Supply Voltage | 16V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Quiescent Current | 1.5mA |
| Output Power | 12W |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 2.2V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2MHz |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.910309mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM2737 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
LM2737MTCX/NOPB Overview
In the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The system can process Transistor Driver dc switching's outputs (s). A 4.5V~5.5V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~125°C TJ rating. Switching can be done at 50kHz~2MHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 14 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. A DC switcher's nominal voltage of 5V is input. LM2737 can be used to locate other relevant dc to dc converter ics. 14 pins are present on switching converter. This dc dc voltage regulator should be powered by a voltage of 2.2V. The test statistics indicate that DC regulator outputs a voltage of 5V. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulators have a maximum frequency of 2MHz. Users should apply 16V to operate the voltage regulator dc to dc safely and reliably. A dc switching in a dormant state uses 1.5mA.
LM2737MTCX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LM2737MTCX/NOPB Applications
There are a lot of Texas Instruments LM2737MTCX/NOPB DC to DC converter applications.
- Power supplies of electronic gadgets
- Product testing
- Elevator lighting
- Grinders
- Die casting equipment
- Thermal power
- Computed tomography (CT)
- Combined machine tools
- Digital video recorders
- Adjustable voltage or current linear circuits
