Parameters |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.65mm |
Base Part Number |
LM2744 |
Function |
Step-Down |
Number of Outputs |
1 |
Output Voltage |
500mV |
Output Type |
Transistor Driver |
Operating Supply Voltage |
6V |
Input Voltage-Nom |
3.3V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
20A |
Voltage - Supply (Vcc/Vdd) |
3V~6V |
Quiescent Current |
1.5mA |
Control Features |
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
Input Voltage (Min) |
3V |
Topology |
Buck |
Control Mode |
VOLTAGE-MODE |
Frequency - Switching |
50kHz~1MHz |
Input Voltage (Max) |
6V |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Switcher Configuration |
PUSH-PULL |
Max Frequency |
1MHz |
Max Duty Cycle |
80 % |
Clock Sync |
No |
Length |
5mm |
Width |
4.4mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM2744MTCX/NOPB Overview
With its 14-TSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 3V~6V volts and has 3V~6V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 50kHz~1MHz. A generalization of dc dc regulator can be made using Surface Mount. Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of 14 terminations are available in dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 3.3V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "LM2744". The switching converter has a total of 14 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 3V. The test statistics indicate that DC regulator outputs a voltage of 500mV. Considering the dc to dc regulator can only accept 6V input voltage, it is important to take note of this. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. The duty cycle of the voltage regulator dc to dc can be set to 80 % on power-up or power-down to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. 1MHz is the maximum frequency of this dc regulators. A circuit should contain 6V in order to ensure the voltage regulator dc to dc runs safely and reliably. DC switchings that are dormant use 1.5mA.
LM2744MTCX/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
LM2744MTCX/NOPB Applications
There are a lot of Texas Instruments LM2744MTCX/NOPB DC to DC converter applications.
- Household control circuits
- CMM
- Solar power plants
- Computer monitoring equipment of building
- SMT equipment
- Motor controller circuits
- Elevator lighting
- Game consoles
- Shearing machines
- CNC system