LM2747MTCX

14 Terminals 3V~6V 14-Pin LM2747 DC to DC converter ICSWITCHING CONTROLLER 50kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-LM2747MTCX
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 771
Description: 14 Terminals 3V~6V 14-Pin LM2747 DC to DC converter ICSWITCHING CONTROLLER 50kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	LM2747
Function	Step-Down
Output Voltage	13.5V
Output Type	Transistor Driver
Operating Supply Voltage	17V
Input Voltage-Nom	3.3V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	3V~6V
Quiescent Current	1.7mA
Control Features	Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
Input Voltage (Min)	3V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	50kHz~1MHz
Input Voltage (Max)	6V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Switcher Configuration	PUSH-PULL
Max Frequency	1MHz
Max Duty Cycle	86 %
Clock Sync	No
Number of Output Phases	1
Length	5mm
Width	4.4mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

LM2747MTCX Overview

Capsuled in the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3V~6V volts and has 3V~6V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 50kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. An array of 14 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 3.3V. You can find other relevant dc to dc converter ics by searching "LM2747". In total, switching converter has 14 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 3V. A 13.5V voltage of DC regulator was detected in the test statistics. This dc to dc regulator accepts only 6V input voltage at most. You should note down the dc dc regulator's usual output current of 20A when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 86 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 17V. A dc switching in a dormant state uses 1.7mA. With this controller, the phase is 1.

LM2747MTCX Features

Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 86 %