LM2750SD-5.0/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 1.7MHz |
| Base Part Number | LM2750 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 87 % |
| Voltage - Input (Max) | 5.6V |
| Output Voltage | 5.5V |
| Output Type | Fixed |
| Max Output Current | 120mA |
| Input Voltage-Nom | 3.1V |
| Max Supply Voltage | 5.6V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Operating Supply Current | 5mA |
| Output Configuration | Positive |
| Current - Output | 120mA |
| Quiescent Current | 5mA |
| Max Output Voltage | 5V |
| Topology | Charge Pump |
| Synchronous Rectifier | No |
| Min Output Voltage | 4.8V |
| Switcher Configuration | DOUBLER INVERTER |
| Nominal Output Voltage | 5V |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM2750SD-5.0/NOPB Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. In this voltage regulator, 10 terminations are present. The type of analog IC that this voltage regulator is equipped with is SWITCHED CAPACITOR REGULATOR. Space savings are achieved by placing this voltage regulator in the 10-WFDFN Exposed Pad package. A total of 1 outputs are configured in this voltage regulator. On its output pins, this adjusting voltage regulator generates Fixed output. Surface Mount-mount switching regulator. Operating at -40°C~125°C TA is the recommended temperature for adjusting voltage regulator's operation. A maximum design flexibility is provided by the 120mA output current of voltage regulator. 5.6V volts is DC DC switching regulator's maximum input voltage. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 3.1V as the nominal input voltage. There is a DC/DC regulator in this family that belongs to the LM2750 family. Voltage can be produced at 5.5V volts by voltage regulator. During switching regulator operation, 10 pins are used. Ideally this switch regulator should have an output voltage of about 4.8V at the very least. A 120mA A maximum output current is required to meet the switching regulator operation requirements. It provides the adjusting voltage regulator's maximal output voltage of 5V. External factors have no impact on DC DC switching regulator's ability to consume 5mA A of quiescent current. The dc to dc voltage regulator's minimum supply voltage of 2.7V volts ensures reliable performance. There is a maximum input voltage of 5.6V that DC DC switching regulator can operate from. At a frequency of 1.7MHz, dc to dc voltage regulator is capable of maintaining high accuracy. It operates on a 5mA supply current of adjusting voltage regulator.
LM2750SD-5.0/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
LM2750SD-5.0/NOPB Applications
There are a lot of Texas Instruments LM2750SD-5.0/NOPB Voltage Regulators applications.
- Magnetohydrodynamic power
- Automatic testing equipment
- Automatic plug-in machines
- Constant current circuits
- Electrical distribution systems
- Experimental setup
- Servo drive system
- Low output voltage switching power supply circuits
- Hydraulic presses
- Ball screw pair
