LM2750SDX-ADJ/NOPB
| Parameters | |
|---|---|
| Input Voltage-Nom | 2.9V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 5mA |
| Max Output Voltage | 5.2V |
| Topology | Charge Pump |
| Frequency - Switching | 1.7MHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 3.8V |
| Switcher Configuration | DOUBLER INVERTER |
| Voltage - Output (Max) | 5.2V |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2750 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 5.6V |
| Output Voltage | 5.2V |
| Output Type | Adjustable |
| Max Output Current | 120mA |
| Voltage - Input (Min) | 2.7V |
LM2750SDX-ADJ/NOPB Overview
optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. There are 10 terminations in this voltage regulator. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHED CAPACITOR REGULATOR-type IC. For space-saving purposes, this voltage regulator is available in the 10-WFDFN Exposed Pad package. In this case, DC DC switching regulator has 1 outputs configured to it. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. The voltage regulator 12v fits the Surface Mount mounting hole. As long as its operating temperature is -40°C~125°C TA, dc to dc voltage regulator should perform well. There is a switching frequency of 1.7MHz for this voltage regulator 12v. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.7V. There is a maximum input voltage of 5.6V for this voltage regulator 12v. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. For operation, switching regulator requires a nominal input voltage of 2.9V. In terms of category, this voltage regulator 12v falls into the Other Analog ICs category. In the particular voltage regulators, the LM2750 family is represented. A voltage of 5.2V volts can be produced by voltage regulator. The switching regulator operation is carried out by 10 pins. As a general rule, this voltage regulator 12v should keep its output voltage at least at 3.8V. Accordingly, dc to dc voltage regulator's maximum output current is 120mA A. By using the 5.2V's maximal output voltage, adjusting voltage regulator can operate easily. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 5.2V. Voltage regulator consumes 5mA A of quiescent current without being affected by outside forces.
LM2750SDX-ADJ/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
LM2750SDX-ADJ/NOPB Applications
There are a lot of Texas Instruments LM2750SDX-ADJ/NOPB Voltage Regulators applications.
- Emergency lighting monitoring equipment
- Industrial controllers
- Series voltage regulation circuits
- Various precision measuring detectors
- Computer application technology
- Hydro power
- Smoke prevention equipment
- CMM
- Computer monitoring equipment of building
- Precision electronic equipment
