LM2751SD-A
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM2751 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Efficiency | 92 % |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.8V |
| Output Current | 80mA |
| Max Output Voltage | 5V |
| Voltage - Output | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.8V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 725kHz |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM2751SD-A Overview
On the board, there is also a 10-WFDFN Exposed Pad package that saves space.For the design of this LED driver, 1 outputs are used.Surface Mount represents this mounting method.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.It is capable of working normally at -40°C~85°C TA.Backlight provides many benefits.In this case, the terminations are set to 10.It has a base configuration of 10 pins.Segments counted are 2.Surface Mount has been mounted with the device.The LED driver is based on part number LM2751.There is no problem with the voltage of 5.5V.There is a voltage output of 5V.This device contains 10 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.A minimal input voltage of 2.8V is required for it to operate.To meet high efficiency standards, it works with a voltage of 2.8V.There is 5.5V maximum value for supply current.80mA is the maximum amount of current that can be supplied to the load.Having the switching frequency at 725kHz enables this electronic component to perform at its best.If the output voltage exceeds 5V, it should be corrected.
LM2751SD-A Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 725kHz
LM2751SD-A Applications
There are a lot of Texas Instruments LM2751SD-A LED Driver ICs applications.
- Refrigeration lighting
- Panel lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Stage Lighting and Signage
- Replacement lamps
- Flicker-free LED Lighting using R1580N
- LED Lightings for Industrial Equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- General lighting
- LED headlights
