LM2751SD-A/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 725kHz |
| Base Part Number | LM2751 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.8V |
| Output Current | 80mA |
| Max Supply Current | 1.5mA |
| Quiescent Current | 1mA |
| Voltage - Output | 5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.8V |
| Max Input Voltage | 5.5V |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Switching Frequency | 725kHz |
| Multiplexed Display Capability | NO |
| Touchscreen | Capacitive |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM2751SD-A/NOPB Overview
Save board space with 10-WFDFN Exposed Pad package. 1 outputs are designed into LED drivers.This mounting method is Surface Mount.In this case, the result is a DC DC Regulator with high efficiency.It is possible for the led driver ic to operate normally at -40°C~85°C TA.The benefits it provides to Backlight are considerable.As a result, it operates on the basis of frequency 725kHz.It operates with terminations of 10.To form its configuration, 10 pins are used.A total of 2 segments are estimated.I have mounted it by Surface Mount.The LED driver is available under the part number LM2751.5.5V is an acceptable maximum value for the supply voltage.The voltage output by it is 5V.There are 10 pins on this device.As a result of its characteristics, it is also classified as Display Drivers.At a voltage of 2.8V, it operates at a minimal input voltage.For highest efficiency, it works with a minimal supply voltage of 2.8V.It reaches 5.5V when the maximum supply current is allowed.It is capable of delivering high efficiency when the maximal supply current is below 1.5mA.The current that can be supplied to the load is 80mA.This electronic component can fully perform its functions when the switching frequency is kept at 725kHz.Absent external factors, there is 1mA consumption of current.
LM2751SD-A/NOPB Features
Available in the 10-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 725kHz
Supply voltage of 3.6V
Switching frequency of 725kHz
LM2751SD-A/NOPB Applications
There are a lot of Texas Instruments LM2751SD-A/NOPB LED Driver ICs applications.
- Medical surgery lighting
- Amusement Machines
- Museum lighting
- Gallery lighting
- LED headlights
- Panel lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- White LED Backlight for portable equipment
- Linear fluorescent
- Stage and Studio lighting
